Armstrong Commercial Painting

Armstrong has been painting Bay Area businesses for over 40 years. Our success has come from experience and determination, moving us away from standard paints to *AWS Specified Formulations. Along with meticulous preparation and attention to detail, Armstrong and our Titanium Packed Paints give you and your home the most protection, as well as one of the most comprehensive warranties available.

*AWS: The Armstrong WeatherGuard System (AWS) is the Application, Warranty, and Specification of materials by Armstrong

Interior Commercial Painting Process:

• El Cerrito Grocery Featured Commercial Interior Painting Project

  Use drop cloths or appropriate floor covering such as plastic or construction paper for floor protection.
• Plastic sheeting placed over interior furniture, equipment or other assets as necessary for protection against possible paint splatter.
• Dusting and removal of surface dirt prior to priming.
• Patch small holes, cracks, caulk around windows and doors with appropriate patching and caulking compound.
• Major cracks repaired with AWS compound and dry wall tape if required.
• De-glossing of enamel surfaces prior to painting, T.S.P. or AWS equivalent as required.
• Prime and neutralize bleed-through trouble spots as needed.
• Apply AWS top coat, latex or alkyd base until coverage obtained (this step as well as all other steps which are stated as may be necessary or needed to be determined by visual inspection of Armstrong's foreman).
• Sanding as necessary of all moldings, trim, doors prior to top coat.
• Apply with a brush, roller or spray to be determined by Armstrong's Certified Installer.
• Cleanup and removal of materials and debris. Touch up materials of each topcoat color left on site.
• Interior Painting by Armstrong warranteed 5 years against chipping, peeling, flaking due to defect in Armstrong's application or materials. (See contract for complete warranty)

Exterior Commercial Painting Process:

• Perform Lead Based Paint Screening Survey on structures built prior to 1979.
• Hydrowash exterior of building to remove dirt/debris.  Mildew wash if necessary.
• Check for popped nails and re-nail if necessary.
• Wirebrush, scrape or sand wood, stucco and trim as necessary to remove loose material.
• Patch cracks and voids in stucco and wood walls as necessary to make less visable.
• Apply AWS* flexible elastomeric caulk around openings as necessary to seal around doors and windows.
• Remove and replace any loose glazing putty materials in wood windows.  Prime as needed.
• Apply wood conditioner to weathered wood as needed.  Apply rust converter to exposed rusted ferrous metal as needed.
• Apply AWS* sealer and/or primer as necessary to building. 
• Apply AWS* top coat and/or elastomeric coating to walls and AWS*.
• Armstrong will clean up property on a daily basis.  Order of work may vary depending on job specifics.

Click Here to find out more or call 877-777-1234 and ask to speak to one
of our representatives.

With Armstrong, it’s that easy!